Posts Tagged ‘angles and viewpoints’

Simple compositions – shapes and tones

Tuesday, September 15th, 2009

simple-compositionsThere is a difference between obvious subjects and those we have to search for. Obvious subjects might be a dramatic sunset, a lit fountain at night, the Eiffel Tower at anytime of the year or a zebra driving a jeep down the high street – these are things you couldn’t resist taking a picture of. Less obvious subjects only appear when you take time to be observant and have your eyes open to patterns, shapes and tones. Sometimes it’s difficult to explain exactly what it is you are photographing, but you can see there is a picture there all the same. And often it is only when you have the time to sit and study the picture after you have taken it that you begin to understand what it was that you saw in the first place. 

The great thing about the less obvious picture is that fewer people see them, and so fewer people take them – so you picture will stand out as being different. 

This picture was taken on an overcast day on a ship far out at sea. Walking the decks with my camera in my hand the obvious thing to do was to look outwards to see what was out at sea. But as the answer was ‘nothing’, the only thing to do was to photograph the ship itself. 

Ships, especially old ones like the QE2, are beautiful to look at. They have wonderful smooth curves and endless lines of rivets, panels, handrails and planking. In the low contrast light of the clouded sky the shapes of the ship were revealed in lightly graduated tones, as moderate shadow slipped into moderate highlight and all the details were carefully preserved. 

Exposing a white scene

Shooting a white subject on a white day can create some exposure difficulties. If you let the camera make all the exposure choices you’ll end up with an image that is just too dark and dull. The camera’s meter will only see a very bright scene and will recommend buttoning down the aperture to ensure things don’t appear too bright. The camera doesn’t know of course that you want the subject to appear bright – it is white after all, so you have to take a little control to add brightness. On this occasion I only had to shift the exposure by about 1/2EV. Using the exposure compensation mode I dialled in +1/2EV – but you can as easily do this in manual exposure mode and open the aperture to over expose by ½ a stop. 

Uprights

A scene like this, which relies on its simplicity, requires that you allow the viewer to appreciate the shapes and tones unhindered by distractions. Firstly make sure that are no annoying, eye grabbing, objects in the scene – a cigarette end, a bit of litter or a person for example. Next, make sure you are not creating any visual distractions, such as sloping horizons, converging verticals and lines that are simply not level. You can’t just point and shoot; there needs to be a few moments devoted to ensuring the camera is straight and level. This doesn’t take much effort, but it will make the difference between a pleasing shot and one that does not convey your message.  

After effects – software manipulation

The key to the success of this image is its simplicity, soft contrast, neutral muted colours and smooth tonality. So long as the white balance – I shot this on the ‘daylight’ setting – was about right in-camera there shouldn’t be too much you’ll need to do to the picture in software. I opened this frame and looked for a while, itching to do something to it. I tried a few things and messed about a bit before I realised that what I really needed to do was to leave it alone. So, I did. 

Pentax K10D, smc Pentax DA-70mm f/2.4 limited edition lens at f/2.4 and 1/2000sec, ISO 400. 

See more of Damien Demolder’s recent photographic posts here

To see more of my pictures visit my galleries at www.damiendemolder.com

To see more of my pictures
visit my photo galleries site
at www.damiendemolder.com


 

simple-compositions

 

The shot looks very nice in black and white too

The shot looks very nice in black and white too

Using a neutral density graduated filter – Beltany stone circle

Saturday, January 10th, 2009

• Using neutral density filters • white balance for dawn light •

Neutral density filters help to control brightness differences.

Neutral density filters help to control brightness differences.

Balancing the brightness of sky and land is a regular problem at any time of day, but first thing in the morning, when the weak sun has still to cast its rays across the landscape, showing the detail in the foreground requires drastic action. On this morning I wanted to capture the atmosphere before the sun had really got up and started to shine. With a fine cover of cloud in the east the sun was up but only as a giant red ball with no real power, but its influence was enough to add a golden glow to the heads of grass in this late summer field.

I had been pointing the camera skyward to place the stone circle at the bottom of a frame of ‘big sky’. From the many times I have visited this place I knew there is only one angle from which to shoot this stone circle that allows it to be shown as a ring rather than a fragmented collection of rocks. It’s unfortunate that the only shooting position is in a dip in the land, which means it’s impossible not to be looking up at the subject. But with a wideangle lens aimed upwards to place the stones at the bottom of the frame the picture just looked like many others I had shot before. I was shooting ‘big sky’ because that is what I had in my head before I arrived, but I had to look a little harder at the scene when I realised the ‘big sky’ composition wasn’t going to work.

Looking afresh made me realise that I was missing an important and interesting element of the scene – the grass heads. The naturally low angle also meant I could include the grasses without tilting the camera down – so distortion would be kept at bay as the camera would be absolutely level.
While including the foreground solved one problem it introduced another. In the unlit morning, the grasses were much darker than the sky, and even the stones in their elevated position. The answer in this situation is to use a neutral density graduated filter to reduce the intensity of the light from the sky while allowing the light through from the lower parts of the scene. I used a 0.6 ND grad, and picked one with a ‘hard’ transition from clear to dark as the horizon is pretty straight in this shot.

It’s important in scenes like this, where you want to capture the natural colours of the morning light and sky that you set an appropriate white balance on your camera. I always use the normal ‘daylight’ setting, as this produces colours closest to what our eyes see, and will show those pinks, peaches and reds in all their glory. If you use auto white balance (AWB) the camera will do it’s best to neutralise those colours.

Canon EOS 1Ds lll with EF16-35mm f/2.8L II USM lens and Lee 0.6 ND graduated filter. ISO 100, 1/3sec @ f/16.

Find Beltany Stone circle on the map, and read information about it

See more of Damien Demolder’s recent photographic posts here

To see more of my pictures visit my galleries at www.damiendemolder.com

To see more of my pictures
visit my photo galleries site
at www.damiendemolder.com


 

Neutral density filters help to control brightness differences.

Neutral density filters help to control brightness differences.

How'd you rate this post on photographing Beltany stone circle?
(Please leave a comment too)

View Results

Loading ... Loading ...

A sense of depth – The Boathole

Sunday, September 28th, 2008

Using layers in your compositon • low angles to show the foreground • selective focusing for emphasis

Boat on Loch Foyle, at the Boathole, St Johnston, Co Donegal, Ireland. By Damien DemolderIt’s hard to create a sense of depth in a photograph, as we are trying to convey our impressions of a three dimensional scene using a flat piece of paper. To get the message over to the viewer we have to choose carefully what we show, as well as how we show it.

We are told that a 50mm lens gives the same angle of view as our eyes, when it’s mounted on a 35mm camera or full frame sensor (it’s about 35mm for APS-C sensors). Really, though, this only represents what we can concentrate on, rather than what we can actually see. There is a big difference between what we take in when we look directly at something, such as when we are talking to another person a few feet away, and what we experience when we are taking in a view or enjoying a pleasant scene. We build a profile in our heads of the atmosphere of a place not by looking in one direction or by concentrating on any single element, but by looking around ourselves, at our surroundings and the sky, and combining all the elements to create a whole and complete impression. We analyse the details, notice what is at our feet and what is in the distance, what is to the side of us, and how the place is made up.

The layers
On this morning I was enjoying the high grasses and plants as I pushed my way through their rain-wet leaves to get to the shore. Before I got to the water’s edge I stopped and took in the scene. What I was struck by was the combination of the flowers up to my waist, the stillness of the water and its gently turning boat, and the pale colours in the pre-sunrise sky. The horizon was almost out of sight in the mist, but before it was a splendid foreground, a high-contrast attention-seeking middle ground, and the shapes of the other side of the loch against the pale blue sky.

Lens choice
To get a sense of realism rather than sheer impact I used the 35mm end of a 16-35mm zoom lens, and, fitted to a tripod, dropped the camera to below the level of the flower tops. Rather than stopping down and focusing a third of the way into the scene for maximum depth of field, I focused on the flowers just a few feet in front of me. I wanted them to get the attention, as even when soft the sky, the boat, the loch and the distance could look after themselves. Viewers are going to look into the distance anyway, but by pulling the focus to the foreground it ensures they pay attention there too.

Brightness balancing
Obviously, with such a range of brightness values I wasn’t going to get the correct exposure for the flowers while still showing the colours of the sky, so I used a 0.9 (3EV) neutral density graduated filter to hold back the illumination levels of the sky and its reflection. This balanced the exposure enough so I could show all the elements within the camera’s dynamic range.

With white balance set for daylight I was able to capture the cool tones of the morning without the camera attempting to turn the scene into a Caribbean dreamscape.

I think that what I have created is a picture that has a real sense of depth that allows the viewer to place him or herself there at the scene, on that morning and see and enjoy the things I experienced too. And if you get yourself up at 4am to look at it the experience will become even more real again!

Canon EOS 1Ds III, with EF16-35mm f/2.8L USM lens set to 35mm, 1.6sec and f/16 at ISO 100. I used a HiTech filter system 0.9 ND graduated filter to reduce the brightness of the sky. TeamWork sells them

Shot at The Boathole on Loch Foyle, St Johnston, Co Donegal, Ireland. Click to see a map.

Did you find this interesting or useful? Let me know by leaving a comment.

To see more of my pictures visit my galleries at www.damiendemolder.com

To see more of my pictures
visit my photo galleries site
at www.damiendemolder.com

Boat on Loch Foyle, at the Boathole, St Johnston, Co Donegal, Ireland. By Damien Demolder