Archive for the ‘Pictures taken with Canon cameras’ Category

Flowers at night by lamp light – night lavender

Monday, September 1st, 2008

Using artificial light • Beating camera shake • Using walls for support • Shooting at an angle

Lavender shot at night by lamp light, by Damien Demolder

We are used to seeing flowers in daylight, and that is how we most often shoot them too. In fact, we really don’t expect to see flowers at night, as most disappear inside themselves once the sun goes down. I spotted this lavender in flowerbeds around a hotel car park late one night, lit by lamps dotted around that were kept on all night. Lit from below and on a level, the lavender stems looked most unusual. I suppose, looking back, I have seen lamp-lit plants many times before, but this was the first time they really caught my eye, and the first time I really looked.

I was on my way back from dinner, so I didn’t have a tripod with me, so I turned the ISO up to 1600, braced my elbows against my knees, and hoped for the best. Shooting with the aperture opened to f/5.6 I managed a shutter speed of 1/25sec most of the time – so with a focal length of 135mm on a full frame sensor I produced plenty of camera-shake. By trying each shot a three or four times I got at least one sharp frame for every composition. There’s always a wall or something to add extra support, and with a bit of luck the angles all work out well – in fact, restricting yourself to the views allowed by wall-mounting can lead to compositions you may not have thought to try otherwise.

For this particular shot I rested my arms on the top of a low wall and held the camera tightly to my face for extra support. Focusing manually in the low light I gently depressed the shutter release as softly as I could, while breathing very slowly. I was using an IS (Canon’s Image Stabilisation) lens, which helped too. Surprisingly, given the conditions, I did manage quite a few sharp images.

Keeping the white balance on daylight has allowed the colours of the sodium lights to reflect in the colours of the plants. The greens of the stems are really quite vibrant, while the purples of the lavender heads are slightly warmer than they might have been. The lavender was leaning over anyway, as it does, but I shot with the camera on an angle to emphasise the fact and to create a more dynamic composition.

Canon EOS 1Ds III with EF 28-135mm f/3.5-5.6 IS lens. ISO 1600, f/5.6 @ 1/25sec. Shot in raw and processed in Adobe Lightroom 

To see more of my pictures visit my galleries at www.damiendemolder.com

To see more of my pictures
visit my photo galleries site
at www.damiendemolder.com

 

Lavender shot at night by lamp light, by Damien Demolder

 

 

Converging verticals – what, how and fixes

Tuesday, May 27th, 2008

Converging Verticals Eiffel Tower with guide linesWhen we look up at a tall building its sides slope inwards to form an inverted V shape. We are so used to seeing in this way that we hardly notice the effect while we are enjoying the view. When we take in the same scene in 2 dimensions, as we do when looking at a photograph, the experience is quite different and we do notice the convergence of the vertical aspects of the building.

If the effect is exaggerated, or at least very obvious, it lends a sense of height and drama to the picture, and we can appreciate a a split second just how tall that building is. However, if the effect is only moderate the building might look as though it is tilting backwards and in danger of falling over.

As with many photographic visual effects moderate applications simply look like mistakes, so we should avoid them at the shooting stage, or learn to correct them afterwards.

The way to avoid the problem is to hold the camera completely level when taking the picture, as it is the looking up angle of the camera that creates the effect. Unfortunately, keeping the camera level usually means that the top of the subject will be cut off. You can move backwards to alter your perspective, but in the majority of cases this is not an option as space is usually limited in architectural locations. In any case you’d have to move a long way for even a moderately tall structure

To see more of my pictures visit my galleries at www.damiendemolder.com

To see more of my pictures
visit my photo galleries site
at www.damiendemolder.com


See a map of where this picture was taken

Converging Verticals Eiffel Tower

Converging verticals – fix by cropping

Wednesday, May 21st, 2008

Converging Verticals Arc De Triomphe A method of avoiding converging verticals that is open to everybody is shooting wide and cropping the result. In short the camera is fitted with a wide angle lens and is held in the upright orientation. Keeping the camera absolutely level you will see that once you have all the building in the shot there will be an excess of foreground that is probably not needed. Don’t worry about that though, just shoot the picture and crop the unwanted space off the final picture. Set the cropping proportions to 5×4 for a professional look, or pick between 6×7 or any other format simulation that suits the picture. You may end up with a horizontal shot from your vertical original, and you will have lost a lot of pixels, but at least the sides of the building will appear straight and completely upright.

This isn’t an ideal solution, but it is quick, easy and it does not require any additional specialist equipment.

Converging Verticals Arc de Triomphe croppedThis picture was made by cropping to 5×4 proportions to give the feel it was taken using a large format camera. As you can see the crop is a little too close and it all looks a bit uncomfortable. I used the full width of the original image to get the final picture size to 2912×2330 pixels, which would still deliver a 10x8in print at 300ppi.

Converging verticals Arc de Triomphe cropped squareFor this picture I cropped square. Again using the full width I was able to produce a final image that measures 2912×2912 pixels, and which prints to 10x10in at 300ppi. The extra space at the bottom makes a more comfortable composition, and a more successful final image.

Shot with a Canon EOS 1Ds, with EF28-135mm f/3.5-5.6 IS - exposure 1/5sec at f/22. ISO 400

The original file for these images measures 2912×4368 pixels and comes from an 11 million pixel camera. As the file is large to begin with there are plenty of cropping options to be had. Try different cropping proportions, such a 6×7, 6×8, to get different effects and to make the most of the file size you had to start with. Cropping to a landscape orientation will always leave you with the smallest final image, so using upright crops

To see more of my pictures visit my galleries at www.damiendemolder.com

To see more of my pictures
visit my photo galleries site
at www.damiendemolder.com